Incorporation of globally available datasets into the roving cosmic-ray neutron probe method for estimating field-scale soil water content

Authors

William A. Avery, University of Nebraska - LincolnFollow
Catherine Finkenbiner, University of Nebraska - Lincoln
Trenton E. Franz, University of Nebraska-LincolnFollow
Tiejun Wang, University of Nebraska-LincolnFollow
Anthony L. Nguy-Robertson, University of Nebraska-LincolnFollow
Andrew E. Suyker, University of Nebraska - LincolnFollow
Timothy J. Arkebauer, University of Nebraska - LincolnFollow
Francisco Munoz-Arriola, University of Nebraska-LincolnFollow

Document Type

Article

Date of this Version

2016

Citation

Hydrol. Earth Syst. Sci., 20, 3859–3872, 2016

doi:10.5194/hess-20-3859-2016

Comments

© Author(s) 2016. CC Attribution 3.0 License.

Abstract

The need for accurate, real-time, reliable, and multi-scale soil water content (SWC) monitoring is critical for a multitude of scientific disciplines trying to understand and predict the Earth’s terrestrial energy, water, and nutrient cycles. One promising technique to help meet this demand is fixed and roving cosmic-ray neutron probes (CRNPs). However, the relationship between observed low-energy neutrons and SWC is affected by local soil and vegetation calibration parameters. This effect may be accounted for by a calibration equation based on local soil type and the amount of vegetation. However, determining the calibration parameters for this equation is labor- and time-intensive, thus limiting the full potential of the roving CRNP in large surveys and long transects, or its use in novel environments. In this work, our objective is to develop and test the accuracy of globally available datasets (clay weight percent, soil bulk density, and soil organic carbon) to support the operability of the roving CRNP. Here, we develop a 1 km product of soil lattice water over the continental United States (CONUS) using a database of in situ calibration samples and globally available soil taxonomy and soil texture data. We then test the accuracy of the global dataset in the CONUS using comparisons from 61 in situ samples of clay percent (RMSE=5.45 wt %, R²=0.68), soil bulk density (RMSE=0.173 g cm^-3, R²=0.203), and soil organic carbon (RMSE=1.47 wt %, R²=0.175). Next, we conduct an uncertainty analysis of the global soil calibration parameters using a Monte Carlo error propagation analysis (maximum RMSE~0.035cm³ cm^-3 at a SWC=0.40 cm³ cm^-3). In terms of vegetation, fast-growing crops (i.e., maize and soybeans), grasslands, and forests contribute to the CRNP signal primarily through the water within their biomass and this signal must be accounted for accurate estimation of SWC. We estimated the biomass water signal by using a vegetation index derived from MODIS imagery as a proxy for standing wet biomass (RMSEm^-2). Lastly, we make recommendations on the design and validation of future roving CRNP experiments.