Off-campus UNL users: To download campus access dissertations, please use the following link to log into our proxy server with your NU ID and password. When you are done browsing please remember to return to this page and log out.

Non-UNL users: Please talk to your librarian about requesting this dissertation through interlibrary loan.

Crystallographic preferred orientation near the surface of a roll-forged tapered roller bearing

Todd Warren Snyder, University of Nebraska - Lincoln

Abstract

The crystallographic texture of retained austenite and martensite near the surface of experimental case-carburized tapered roller bearing cones was determined in the ‘as produced’ and ‘after service’ conditions (before and after 4 × 108 cycles of rolling contact) using a cobalt x-ray source. A method of background and defocusing correction was developed which accounted extremely well for sample curvature, inexact positioning, and beam intensity which varies with incident beam direction. The texture of the near-surface martensite was determined to contain a combination of sheet textures: {031}⟨213⟩, {121}⟨123⟩, and {311}⟨121⟩ with magnitudes of approximately 1.22 times-random. The near-surface crystallographic texture of the austenite in the ‘as produced’ condition was found to contain multiple sheet textures of {313}⟨132⟩, {123}⟨032⟩, and {123}⟨331⟩ with magnitudes of approximately 1.5 times-random. The subsurface crystallographic texture of the austenite in the ‘after service’ condition was found to be void of the original sheet components and contained only the {100}⟨011⟩ sheet component with a magnitude of 1.65 times-random. The textural components of the ‘as produced’ austenite were determined to have been annihilated by deformation to form the {100}⟨011⟩ texture in austenite and by transformation of the {313}⟨132⟩ and {123}⟨032⟩ textures to martensite.

Subject Area

Metallurgy|Materials science

Recommended Citation

Snyder, Todd Warren, "Crystallographic preferred orientation near the surface of a roll-forged tapered roller bearing" (1999). ETD collection for University of Nebraska-Lincoln. AAI9942154.
https://digitalcommons.unl.edu/dissertations/AAI9942154

Share

COinS