Electrical and Computer Engineering, Department of
Department of Electrical and Computer Engineering: Faculty Publications
Accessibility Remediation
If you are unable to use this item in its current form due to accessibility barriers, you may request remediation through our remediation request form.
Document Type
Article
Date of this Version
12-16-2013
Citation
Optics Express 21:25 (2013), pp. 30474 - 30480; doi: 10.1364/OE.21.030474
Abstract
We propose and demonstrate a multiplexing method for ultrasonic sensors based on fiber Bragg gratings (FBGs) that are included inside the laser cavity of a fiber-ring laser. The multiplexing is achieved using add-drop filters to route the light signals, according to their wavelengths, into different optical paths, each of which contains a separate span of erbium-doped fiber (EDF) as the gain medium. Because a specific span of EDF only addresses a single wavelength channel, mode completion is avoided and the FBG ultrasonic sensors can be simultaneously demodulated. The proposed method is experimentally demonstrated using a two-channel system with two sensing FBGs in a single span of fiber.
Comments
Copyright © 2013 Optical Society of America. Used by permission.