Mechanical & Materials Engineering, Department of
Mechanical (and Materials) Engineering -- Dissertations, Theses, and Student Research
1) it is optional, not required (the ProQuest deposit is required); and
2) it will be available to everyone on the Internet; there is no embargo for dissertations in the UNL DigitalCommons.
Master's candidates: Deposit of your thesis or project is required. If an embargo is necessary, you may deposit the thesis at http://digitalcommons.unl.edu/embargotheses/ with the prior approval of your department and the Graduate Office (contact Terri Eastin).
All depositors: We try to observe a 24-hour "cooling off" period to give you opportunity to correct those "oops" issues that seem to emerge just after deposit.
Upon deposit, you will immediately receive an email that your submission has been received (and this is what you need to show the Graduate Office).
However, you can still log back in and select Revise and upload a new version with your advisor's name spelled right, or your mother thanked in the Acknowledgments, or whatever you're stressing about.
After about a day, your submission will be "published" or "posted", making it available to the Internet; you will get another email to that effect, and your submission can no longer be changed--by you.
If further changes are needed, these can be made by sending a revised file to the administrator < proyster@unl.edu > requesting replacement of the current online version. DO NOT RESUBMIT YOUR THESIS / DISSERTATION. That creates duplicate records, confusion, wasted effort, frustration, sadness, tears, and causes kittens to get sick.
Finally: Congratulations; you are almost there. Click the "Submit your paper or article" link at the bottom of the gray box at left. Follow the instructions. You should be able to copy (Ctrl-C) and paste (Ctrl-V) most fields.
You are the sole author; your advisor is not considered a co-author.
Your institution is "University of Nebraska-Lincoln" (not "at Lincoln" or ", Lincoln"). Do not leave it blank; then the administrator has to fill it in, and he is tempted to make it something silly.
You do not need to repeat your name and title in the Abstract field; just the body of the abstract.
When you reach the question "Was this submission previously published in a journal?", just skip that part.
Be sure to click the "Submit" button at the bottom. Files upload at the rate of about 5 Mb per minute, so if you have an ungodly large file, it may take a bit of time. If your file exceeds 40 Mb, think about reducing its size--there are many ways; Google "reduce pdf file size" to find some.
Okay, get started. That thesis is not going to submit itself.
2013
Passive and Actuated Grasping Using Superelastic Materials for Surgical Applications, Alan M. Goyzueta
Miscibility and influence on each other of a UV photo-initiated thermosetting polymer blend of radical and cationic systems, Kevin Lefebvre
Design of Experimental Methods to Test the Performance of Pads and Helmets under Blast Loading Conditions, Kurtis Palu
2012
Microstructure Selection of Sm-Co-Al Alloys to Increase Magnetization, Brian Dick
Automated Resonant Wireless Power Transfer to Remote Sensors from an Unmanned Aerial Vehicle, Brent Griffin
Modular Joystick Design for Virtual Reality Surgical Skills Training, Michael Head
Identification of a Maximum Guardrail Height for the Midwest Guardrail System Using Computer Simulation, Ramen D. Julin
Sustainability for Die Manufacturing: Comparative Study of WEDM and Milling, Matthew S. Kalus
Improving Health Care Quality and Safety: The Development and Assessment of Laparoscopic Surgery Instrumentation, Practices and Procedures, Bernadette McCrory
Material Handling System for Robotic Natural Orifice Surgery, Jeff Midday
Analysis of Mechanically Milled Exchange Coupled Nanocomposite Permanent Magnets, Santanu Mukherjee
THE INTEGRATION OF PROPANE FLAMING AND MECHANICAL CULTIVATION FOR EFFECTIVE WEED CONTROL IN AGRICULTURE, Brian D. Neilson
A Conductivity Testing System Coupled with a Tensile Testing Machine to Measure the Surface Properties of Polymer Specimens, Nguyen T. Nguyen
Error Reduction and Effect of Step Size in Adjustment Calculus for Cam Applications, Sai Siddhartha Nudurupati
Effects of Approach Techniques in Place Kicking: A 3D Analysis, Chase M. Pfeifer
A Study of HDPE in High Pressure of Hydrogen Gas—Measurement of Permeation Parameters and Fracture Criteria, Sompong Prachumchon
Optimal Reduction of Electrical Energy Consumption by Supply Air AC Motors, Keyhan Rafiee
DESIGN, ANALYSIS AND TESTING OF HAPTIC FEEDBACK SYSTEM FOR LAPAROSCOPIC GRASPERS IN IN VIVO SURGICAL ROBOTS, Nikhil Salvi
Predicting Vehicle Dynamics for Roadside Safety Using Multibody Systems Simulations, Brett D. Schlueter
Development and Recommendations for a Non-Proprietary, High-Tension, Cable End Terminal System, Ryan J. Terpsma
2011
MECHANICAL PROPERTIES OF PECVD BORON CARBIDE, Dhairyashil Aher
ARTICULATED MECHANISM DESIGN AND KINEMATICS FOR NATURAL ORIFICE TRANSLUMENAL ENDOSCOPIC SURGERY ROBOT, Wei Jian Chin
Gas Embolic Factors in Cardiovascular Health, Eric L. Cutler
FRACTURE ANALYSES OF AGING AIRCRAFT STRUCTURES AND HUMAN AORTA, Ananth Ram Mahanth Kasavajhala
SIX DEGREE OF FREEDOM MINIATURE IN VIVO ROBOT FOR LAPAROENDOSCOPIC SINGLE-SITE SURGERY, Ryan L. McCormick
FEASIBILITY ANALYSIS AND CONCEPT DEVELOPMENT OF A CRASH CUSHION DIAPHRAGM STRUCTURE FOR HIGH-SPEED RACE TRACKS, Curt Lee Meyer
Simulation and Control System of a Railroad Track Power Harvesting Device, Kyle J. Phillips
Energy Harvesting Systems Design for Railroad Safety, Abolfazl Pourghodrat
Robotic Manipulator With Multiple Instruments For Natural Orifice Translumenal Endoscopic Surgery, Chi Min Seow
Design and Analysis of Blast Induced Traumatic Brain Injury Mechanism Using a Surrogate Headform: Instrumentation and Outcomes, Eyitejumade A. Sogbesan
Anisotropic Thermal Property Measurement of Carbon-fiber/Epoxy Composite Materials, Tian Tian
DESIGN, ANALYSIS, AND TESTING OF IN VIVO SURGICAL ROBOTS, Tyler David Wortman
2010
Structural and Magnetic Properties of Neodymium - Iron - Boron Clusters, Jeremy J. Anderson
MECHANICAL TESTING DEVICE FOR VISCOELASTIC BIOMATERIALS, Jeff D. Berg
Measurement, Simulation, and Analysis of the Mechanical Response of Railroad Track, Curt J. Greisen
IMPROVED MOBILE WIRELESS IN VIVO SURGICAL ROBOTS: MODULAR DESIGN, EXPERIMENTAL RESULTS, AND ANALYSIS, Jeff Hawks
MATERIAL MODELING AND ANALYSIS FOR THE DEVELOPMENT OF A REALISTIC BLAST HEADFORM, S. G. M. Hossain
BULGING FACTORS IN GEOMETRICALLY NONLINEAR CRACKED LAMINATED SHELL STRUCTURE UNDER DYNAMIC INTERNAL PRESSURE, Nitin B. Ingale Mr.
DESIGN AND ANALYSIS OF MULTIFUNCTIONAL ROBOT FOR NOTES, Akiko Nakamura
STOCHASTIC OPTIMAL CONTROL IN NONLINEAR SYSTEMS, Celestin Nkundineza
A Concise Model of 3x7 Wire Rope Used in Cable Guardrail Systems, Cody S. Stolle
Eutectic Solidification Limits and Mechanical Properties of Sm-Co-Fe Alloys, Wendy Ann Wagner
Electromagnetic Field Calculations for Microlens Optical Systems, Jian Wang
2009
Optical Properties of Semiconducting Boron Carbide for Neutron Detection Applications, Ravi B. Billa
Towards Supervised Autonomous Task Completion Using an in vivo Surgical Robot, Jason J. Dumpert
MODELING AND SIMULATION OF INTERACTIONS BETWEEN BLAST WAVES AND STRUCTURES FOR BLAST WAVE MITIGATION, Wen Peng
DEVELOPMENT OF GUIDELINES FOR DEFORMABLE AND RIGID SWITCH IN LS-DYNA SIMULATION, Ling Zhu
2008
Real-Time Vertical Track Deflection Measurement System, Sheng Lu
