Mechanical & Materials Engineering, Department of
Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research
1. it is optional, not required (the ProQuest deposit is required); and
2. it will be available to everyone online; there is no embargo for dissertations in the UNL Digital Commons.
Master's candidates: Deposit of your thesis or project is required. (If an embargo [restricted access] is necessary, you may deposit it at https://digitalcommons.unl.edu/embargotheses/ only after getting approval from your department and the Graduate Office; contact Terri Eastin).
TO DEPOSIT YOUR DISSERTATION OR THESIS
1. Create or log in to your Digital Commons account
To create an account: click on My Account at https://digitalcommons.unl.edu then Sign up.
Fill in your names, email address, create a password, and click on Create Account.
Reply to the confirming email from the system, if you get one (check your spam folder).
Your email address will not be published or shared.
2. Instructions for deposit
Click the Submit your paper or article link at the bottom of the gray box at left.
You should be able to copy (Ctrl-C) and paste (Ctrl-V) most fields.
TITLE: Fill it in using title case (that is, capitals for the first letter of all words except articles and prepositions).
AUTHOR: In each respective box, enter your names (and/or initials) as they appear on the title page of your dissertation or thesis. You are the sole author; your advisor is not considered a co-author. Institution is University of Nebraska-Lincoln (not "at Lincoln" or ", Lincoln"). Do not leave this field blank.
FIRST ADVISOR: Enter your advisor’s name. Add a second and third, if needed (advisors only, not committee members).
DATE OF THIS VERSION: Month and Year only.
CITATION: Copy and paste the rest of whatever appears on the title page of your work. It usually starts with something like “A THESIS Presented to the Faculty …” and ends with “Lincoln, Nebraska [month] [year].”
ABSTRACT: Just include the body of the abstract, not the title or your name, but DO add your advisor’s name at the end of the abstract after the word Advisor and a colon, like this: Advisor: ….
Skip the ORCID IDs, Keywords, Disciplines, and Comments fields, and DO NOT check a bubble for the Publication Status field.
Click UPLOAD FILE FROM YOUR COMPUTER. Select the file of your work from your device (should be in Portable Document Format, PDF).
Click the SUBMIT button at the bottom.
YOU DID IT; your work is submitted!
CONGRATULATIONS on reaching this amazing milestone in your academic career!
3. After your initial deposit
Upon deposit, you will receive an email that your submission has been received; you need to show the Graduate Office this message.
Before we complete your upload, we usually wait a day or two to give you an opportunity to correct those oops issues that seem to emerge just after deposit. Before it’s been posted, you can still log back in and select Revise and upload a new version so you can upload a version with your advisor's name spelled right or whatever else needs to be fixed.
It is important that you DO NOT resubmit another file after it’s been posted online. This causes lots of problems.
But have no fear: If further changes are needed after it’s been posted, you can send a revised file to the series administrator (Sue Gardner) requesting to replace it.
2016
Models for Decanting Gaseous Fuel Tanks: Simulations with GFSSP Thermal Model, Kailash Kumar Jain Munoth
Fluid dynamic factors as a cause and effect of biofilm formation of Staphylococcus aureus biofilms, Erica Sherman
Design and Evaluation of Pediatric Gait Rehabilitation Robots, Cale J. Stolle
Dynamic Responses of Wheel-Rail Systems with Block Dampers, TzuYu Tseng
Design of Medical Devices for Diagnostics in the Gastrointestinal System, Charles R. Welch
Material Evaluation: Self Damping Wire SD/ACSR Conductor Failures, Daniel F. Weyer
2015
MICROSTRUCTURE ALONE INDUCED WETTING TRANSITION FROM HYDROPHILIC TO HYDROPHOBIC ON SILICON AND GRAPHENE, Henry L. Ems
Inert-Gas Condensed Co-W Nanoclusters: Formation, Structure and Magnetic Properties, Farhad Reza Golkar-Fard
Size Effects in Human Visual Inspection for Micro/Meso Scale Parts, Sri Harsha Kavuri
Microstructure and Phase Analysis in Mn-Al and Zr-Co Permanent Magnets, Michael J. Lucis
INFLUENCE OF SPATIAL VARIATIONS OF RAILROAD TRACK STIFFNESS AND MATERIAL INCLUSIONS ON FATIGUE LIFE, Celestin Nkundineza
Experimental investigation and thermal modeling on electro discharge drilling of PCD, Farnaz Nourbakhsh
Biomechanical Investigation of Elite Place-Kicking, Chase M. Pfeifer
Conceptual Development of an Impact-Attenuation System for Intersecting Roadways, Joseph G. Putjenter
Using Controlled Curing in a Custom Stereolithography-based 3D Printing Machine to Obtain Graded Property Variations, Evan S. Schwahn
MODELING AND SIMULATION OF MICRO ELECTRICAL DISCHARGE MACHINING PROCESS, Bai Shao
Ultrahigh Density Sub-10 nm Cobalt Nanowire arrays: Simulation, Fabrication, and Characterization, Yuan Tian
Efficiency Enhancement in Solution Processed Organic and Organic-Inorganic Hybrid Perovskite Solar Cells, Zhengguo Xiao
A SENSORLESS HAPTIC INTERFACE FOR ROBOTIC MINIMALLY INVASIVE SURGERY, Baoliang Zhao
2014
ROBUST SYSTEM FOR INFECTION CONTROL - AN INDUSTRIAL SYSTEMS ENGINEERING APPROACH, Sundaravel Vinay Swarup Achudhan
Microstructure and Magnetic Behavior Studies of Processing-controlled and Composition-modified Fe-Ni and Mn-Al Alloys, Yunlong Geng
Low Noise, High Detectivity Photodetectors based on Organic Materials, Fawen Guo
TOWARDS A SUSTAINABLE MODULAR ROBOT SYSTEM FOR PLANETARY EXPLORATION, S. G. M. Hossain
Structural, magnetic and microstructural studies of composition-modified Sm-Co ribbons, Xiujuan Jiang
Heat Transfer Enhancement and Applications of Femtosecond Laser Processed Metallic Surfaces, Corey M. Kruse
Design and Assembly of Parabolic Flight Payload to Evaluate Miniature in vivo Surgical Robots in Microgravity, Kearney M. Lackas
An Experimental Study of the Implementation of a Fluid Diode Inside a Sano Shunt, Patrick Austin Lane
Design and Development of a Miniature In Vivo Surgical Robot with Distributed Motor Control for Laparoendoscopic Single-Site Surgery, Eric J. Markvicka
FLUID POWERED MINIATURE IN-VIVO ROBOTS FOR MINIMALLY INVASIVE SURGERY (MIS), Abolfazl Pourghodrat
Application of limited mixing in the Hele-Shaw geometry in fabrication of Janus hydrogels, Md Mahmudur Rahman
Fluid Flow-Induced Mesenchymal Stem Cell Migration: Role of FAK and ROCK Mechanosensors, Brandon D. Riehl
INCREASED SPAN LENGTH FOR THE MGS LONG-SPAN GUARDRAIL SYSTEM, Nicholas A. Weiland
Control of Responses of Smart Plate Structures Under Non-Stationary Random Excitations, Xiaojian Yang
Evaluation of the Mass Transfer Effect of the Stalk Contraction-Relaxation Cycle of Vorticella convallaria, Jiazhong Zhou
2013
Flow-Induced Crystallization of Isotactic Polypropylene and Random Polyethylene-Polypropylene Copolymers, Frederic Aubin
Development of a controllable polymer system using interpenetrating networks, Emilie Bobo
Nd-Fe-B Nanoparticles through Surfactant Assisted Mechanical Milling and Alloy Design, Jordann M. Bornhoft
Developing and Characterizing a Rapid Prototyping Stereo-Lithography Machine to Produce Interpenetrating Polymer Network Systems, Lena R. Butterfield
Experimental study on the effect of air flow on soap bubble formation, John M. Davidson
Design of a Compliant Underactuated Robotic Finger with Coordinated Stiffness, Etienne Dessauw
ULTRASONIC PROPAGATION AND SCATTERING IN PEARLITIC STEEL, Hualong Du
Near-Infrared Surface-Enhanced Fluorescence Using Silver Nanoparticles in Solution, Michael D. Furtaw
Passive and Actuated Grasping Using Superelastic Materials for Surgical Applications, Alan M. Goyzueta
Measurement and Description of Dynamics Required for in vivo Surgical Robotics via Kinematic Methods, Jacob G. Greenburg
THE MECHANICS OF INTRACRANIAL LOADING DURING BLAST AND BLUNT IMPACTS – EXPERIMENTAL AND NUMERICAL STUDIES, Veera Selvan Kuppuswamy
Miscibility and influence on each other of a UV photo-initiated thermosetting polymer blend of radical and cationic systems, Kevin Lefebvre
STRUCTURAL & MAGNETIC CHARACTERIZATION STUDY OF HfCo7 ALLOY WITH SUBSTITUTIONS OF Si, Ti, Fe, Mn & B, Jacob A. Lewis
Design of Experimental Methods to Test the Performance of Pads and Helmets under Blast Loading Conditions, Kurtis Palu
PAN Nanofibers and Nanofiber Reinforced Composites, Cheng Ren
Relaxation of Shear-Induced Precursors in Isotactic Polypropylene and Random Propylene-Ethylene copolymers, Benjamin Schammé
Zone of Intrusion for Permanent 9.1-degree Single Slope Concrete Barriers, Cale J. Stolle
Interface properties of bio-based composites of polylactic acid and bamboo fibers, Quentin Viel
2012
Microstructure Selection of Sm-Co-Al Alloys to Increase Magnetization, Brian Dick
Automated Resonant Wireless Power Transfer to Remote Sensors from an Unmanned Aerial Vehicle, Brent Griffin
Modular Joystick Design for Virtual Reality Surgical Skills Training, Michael Head
Identification of a Maximum Guardrail Height for the Midwest Guardrail System Using Computer Simulation, Ramen D. Julin
Sustainability for Die Manufacturing: Comparative Study of WEDM and Milling, Matthew S. Kalus
Improving Health Care Quality and Safety: The Development and Assessment of Laparoscopic Surgery Instrumentation, Practices and Procedures, Bernadette McCrory
Material Handling System for Robotic Natural Orifice Surgery, Jeff Midday
Analysis of Mechanically Milled Exchange Coupled Nanocomposite Permanent Magnets, Santanu Mukherjee
THE INTEGRATION OF PROPANE FLAMING AND MECHANICAL CULTIVATION FOR EFFECTIVE WEED CONTROL IN AGRICULTURE, Brian D. Neilson
A Conductivity Testing System Coupled with a Tensile Testing Machine to Measure the Surface Properties of Polymer Specimens, Nguyen T. Nguyen
Error Reduction and Effect of Step Size in Adjustment Calculus for Cam Applications, Sai Siddhartha Nudurupati
Effects of Approach Techniques in Place Kicking: A 3D Analysis, Chase M. Pfeifer
A Study of HDPE in High Pressure of Hydrogen Gas—Measurement of Permeation Parameters and Fracture Criteria, Sompong Prachumchon
Optimal Reduction of Electrical Energy Consumption by Supply Air AC Motors, Keyhan Rafiee
DESIGN, ANALYSIS AND TESTING OF HAPTIC FEEDBACK SYSTEM FOR LAPAROSCOPIC GRASPERS IN IN VIVO SURGICAL ROBOTS, Nikhil Salvi
Predicting Vehicle Dynamics for Roadside Safety Using Multibody Systems Simulations, Brett D. Schlueter
Development and Recommendations for a Non-Proprietary, High-Tension, Cable End Terminal System, Ryan J. Terpsma
2011
MECHANICAL PROPERTIES OF PECVD BORON CARBIDE, Dhairyashil Aher
ARTICULATED MECHANISM DESIGN AND KINEMATICS FOR NATURAL ORIFICE TRANSLUMENAL ENDOSCOPIC SURGERY ROBOT, Wei Jian Chin
Gas Embolic Factors in Cardiovascular Health, Eric L. Cutler
FRACTURE ANALYSES OF AGING AIRCRAFT STRUCTURES AND HUMAN AORTA, Ananth Ram Mahanth Kasavajhala
SIX DEGREE OF FREEDOM MINIATURE IN VIVO ROBOT FOR LAPAROENDOSCOPIC SINGLE-SITE SURGERY, Ryan L. McCormick
FEASIBILITY ANALYSIS AND CONCEPT DEVELOPMENT OF A CRASH CUSHION DIAPHRAGM STRUCTURE FOR HIGH-SPEED RACE TRACKS, Curt Lee Meyer
Simulation and Control System of a Railroad Track Power Harvesting Device, Kyle J. Phillips
Energy Harvesting Systems Design for Railroad Safety, Abolfazl Pourghodrat
Robotic Manipulator With Multiple Instruments For Natural Orifice Translumenal Endoscopic Surgery, Chi Min Seow
Design and Analysis of Blast Induced Traumatic Brain Injury Mechanism Using a Surrogate Headform: Instrumentation and Outcomes, Eyitejumade A. Sogbesan
Anisotropic Thermal Property Measurement of Carbon-fiber/Epoxy Composite Materials, Tian Tian
DESIGN, ANALYSIS, AND TESTING OF IN VIVO SURGICAL ROBOTS, Tyler David Wortman
2010
Structural and Magnetic Properties of Neodymium - Iron - Boron Clusters, Jeremy J. Anderson
MECHANICAL TESTING DEVICE FOR VISCOELASTIC BIOMATERIALS, Jeff D. Berg
Measurement, Simulation, and Analysis of the Mechanical Response of Railroad Track, Curt J. Greisen
IMPROVED MOBILE WIRELESS IN VIVO SURGICAL ROBOTS: MODULAR DESIGN, EXPERIMENTAL RESULTS, AND ANALYSIS, Jeff Hawks
MATERIAL MODELING AND ANALYSIS FOR THE DEVELOPMENT OF A REALISTIC BLAST HEADFORM, S. G. M. Hossain
BULGING FACTORS IN GEOMETRICALLY NONLINEAR CRACKED LAMINATED SHELL STRUCTURE UNDER DYNAMIC INTERNAL PRESSURE, Nitin B. Ingale Mr.
DESIGN AND ANALYSIS OF MULTIFUNCTIONAL ROBOT FOR NOTES, Akiko Nakamura
STOCHASTIC OPTIMAL CONTROL IN NONLINEAR SYSTEMS, Celestin Nkundineza
A Concise Model of 3x7 Wire Rope Used in Cable Guardrail Systems, Cody S. Stolle
Eutectic Solidification Limits and Mechanical Properties of Sm-Co-Fe Alloys, Wendy Ann Wagner
Electromagnetic Field Calculations for Microlens Optical Systems, Jian Wang
2009
Optical Properties of Semiconducting Boron Carbide for Neutron Detection Applications, Ravi B. Billa
Towards Supervised Autonomous Task Completion Using an in vivo Surgical Robot, Jason J. Dumpert
MODELING AND SIMULATION OF INTERACTIONS BETWEEN BLAST WAVES AND STRUCTURES FOR BLAST WAVE MITIGATION, Wen Peng
DEVELOPMENT OF GUIDELINES FOR DEFORMABLE AND RIGID SWITCH IN LS-DYNA SIMULATION, Ling Zhu
2008
Real-Time Vertical Track Deflection Measurement System, Sheng Lu