Biological Systems Engineering, Department of
Date of this Version
6-2009
Document Type
Article
Citation
An ASABE Meeting Presentation, Paper Number: 096726
Written for presentation at the 2009 ASABE Annual International Meeting Sponsored by ASABE Grand Sierra Resort and Casino Reno, Nevada June 21 – June 24, 2009
Abstract
A sensor array consisting of two laser sensors was utilized to determine the guidance directrix (offset distance-d, heading angle-ø) that are required as reference inputs for an automated guidance system. The sensor array was evaluated in both laboratory and field conditions. Under laboratory conditions the sensor array replicated the physical profile of the target surface with a 4% error in determining the heading angle. Field tests were conducted in two types of crops; corn and alfalfa. The sensor array identified the cut-crop edge profile ahead of the tractor and replicated distinct shapes of the cut-crop edge. RMSE values in determining the offset distances and heading angles of the cut-crop edge in corn were within 5.5 cm and 4.39°. In the case of alfalfa cut-crop edge the RMSE values were within 6.6 cm and 4.32°.
Included in
Acoustics, Dynamics, and Controls Commons, Bioresource and Agricultural Engineering Commons, Operations Research, Systems Engineering and Industrial Engineering Commons
Comments
Used by permission.