Chemical and Biomolecular Engineering, Department of
Date of this Version
5-2012
Document Type
Article
Abstract
Analysis techniques are needed to determine the quantity and structure of materials composing an organic layer that is below an optical ultra-thin film limit and in a liquid environment. Neither optical nor acoustical techniques can independently distinguish between thickness and porosity of ultra-thin films due to parameter correlation. A combined optical and acoustical approach yields sufficient information to determine both thickness and porosity. The author describes application of the combinatorial approach to measure single or multiple organic layers when the total layer thickness is small compared to the wavelength of the probing light. The instrumental setup allows for simultaneous in-situ spectroscopic ellipsometry and quartz crystal microbalance dynamic measurements, and it is combined with a multiple-inlet fluid control system for different liquid solutions to be introduced during experiments. A virtual separation approach is implemented into an analysis scheme, differentiated by whether or not the organic adsorbate and liquid ambient densities are equal. The analysis scheme requires that the film be assumed transparent and rigid (non-viscoelastic). The author presents and discusses applications of the approach to studies of organic surfactant adsorption, self-assembled monolayer chemisorption, and multiple-layer target DNA sensor preparation and performance testing.
Advisor: Mathias Schubert
Comments
A THESIS Presented to the Faculty of The Graduate College at the University of Nebraska In Partial Fulfillment of Requirements For the Degree of Master of Science, Major: Chemical Engineering, Under the Supervision of Professor Mathias Schubert. Lincoln, Nebraska: May, 2012
Copyright (c) 2012 Keith B. Rodenhausen, Jr.