Spherical silicon-shell photonic band gap structures fabricated by laser-assisted chemical vapor deposition

Authors

H. Wang, University of Nebraska-Lincoln
Z. Y. Yang, University of Nebraska-Lincoln
Yongfeng Lu, University of Nebraska-LincolnFollow

Date of this Version

2-15-2007

Comments

Published in JOURNAL OF APPLIED PHYSICS 101, 033129 2007. © 2007 American Institute of Physics. Used by permission.

Abstract

Laser-assisted chemical vapor deposition was applied in fabricating three-dimensional (3D) spherical-shell photonic band gap (PBG) structures by depositing silicon shells covering silica particles, which had been self-assembled into 3D colloidal crystals. The colloidal crystals of self-assembled silica particles were formed on silicon substrates using the isothermal heating evaporation approach. A continuous wave Nd:YAG laser (1064 nm wavelength) was used to deposit silicon shells by thermally decomposing disilane gas. Periodic silicon-shell/silica-particle PBG structures were obtained. By removing the silica particles enclosed in the silicon shells using hydrofluoric acid, hollow spherical silicon-shell arrays were produced. This technique is capable of fabricating structures with complete photonic band gaps, which is predicted by simulations with the plane wave method. The techniques developed in this study have the potential to flexibly engineer the positions of the PBGs by varying both the silica particle size and the silicon-shell thickness. Ellipsometry was used to investigate the specific photonic band gaps for both structures.