Mechanical & Materials Engineering, Department of

 

Date of this Version

Spring 4-18-2012

Document Type

Article

Citation

A THESIS, Presented to the Faculty of The Graduate College at the University of Nebraska In Partial Fulfillment of the Requirements For the Degree of Master of Science, Major: Mechanical Engineering, Under the Supervision of Professor Jeff A. Hawks. Lincoln, Nebraska: May, 2012

Copyright (c) 2012 Chase M. Pfeifer

Comments

Notice

Distribution of the MS thesis Effects of Approach Techniques in Place Kicking: A 3D Analysis by Chase Pfeifer was suspended following review by the University of Nebraska–Lincoln Institutional Review Board (IRB), the governing body that oversees human subjects research conducted in affiliation with UNL.

The thesis has now been moved to the Embargoed Thesis Series at http://digitalcommons.unl.edu/embargotheses/39

Abstract

Various studies aim to understand the fundamentals of kicking, primarily the instep kick commonly used by soccer players. Of those studies, most are limited to a 2D analysis using high-speed cameras for position tracking and electromyography to observe muscle activity. The few studies that investigate a 3D model are limited in their position tracking capabilities and focus mainly on joint flexion potentials and foot speed. To the authors knowledge no study of this caliber has been performed on the kinematics and dynamics of place kicking in American football. This thesis uses a 12 camera high-speed motion tracking system to investigate the kicking techniques of three place kickers of different experience levels by observing several kicks from each. Results demonstrate that the quality of a place kick cannot be determined solely on foot speed but direction and location of foot velocity and the force of the kicking leg at impact. Position and orientation of the plant foot proves to be a driving factor in producing a more ideal effective kinetic energy as well as direction of foot velocity upon impact.

Advisor: Jeff A. Hawks

Share

COinS