Mechanical & Materials Engineering, Department of
Department of Mechanical and Materials Engineering: Faculty Publications
2021
ROBOTIC SURGICAL DEVICES , SYSTEMS , AND RELATED METHODS, Shane Farritor, Erik Mumm, Philip Chu, Nishant Kumar, Jason Dumpert, and Yutaka Tsutano
Sensitive X-Ray and Gamma-Ray Detectors Including Perovskite Single Crystals, Jinsong Huang and Haotong Wei
Twinning-assisted dynamic adjustment of grain boundary mobility, Qishan Huang, Qi Zhu, Yingbin Chen, Mingyu Gong, Jixue Li, Ze Zhang, Wei Yang, Jian Wang, Haofei Zhou, and Jiangwei Wang
Modulation of Mechanical Stress Mitigates Anti-Dsg3 Antibody-Induced Dissociation of Cell–Cell Adhesion, Xiaowei Jin, Jordan Rosenbohm, Eunju Kim, Amir Monemian Esfahani, Kristina Seiffert-Sinha, James K. Wahl III, Jung Yul Lim, Animesh A. Sinha, and Ruiguo Yang
Modulation of Mechanical Stress Mitigates Anti-Dsg3 Antibody-Induced Dissociation of Cell–Cell Adhesion, Xiaowei Jin, Jordan Rosenbohm, Eunju Kim, Amir Monemian Monemianesfahani, Kristina Seiffert-Sinha, James K. Wahl III, Jung Yul Lim, Animesh A. Sinha, and Ruiguo Yang
A novel large animal model of smoke inhalation-induced acute respiratory distress syndrome, Premila D. Leiphrakpam, Hannah R. Weber, Andrea McCain, Roser Romaguera Matas, Ernesto Martinez Duarte, and Keely L. Buesing
Mechanical Behavior of Al–Al2Cu–Si and Al–Al2Cu Eutectic Alloys, Qian Lei, Jian Wang, and Amitava Mitra
Assembly of Close-Packed Ferroelectric Polymer Nanowires via Interface-Epitaxy with ReS2, Dawei Li, Shuo Sun, Kun Wang, Zahra Ahmadi, Jeffrey E. Shield, Stephen Ducharme, and Xia Hong
Metallic surface doping of metal halide perovskites, Yuze Lin, Yuchuan Shao, Jun Dai, Tao Li, Yi Liu, Xuezeng Dai, Xun Xiao, Yehao Deng, Alexei Gruverman, Xiao Cheng Zeng, and Jinsong Huang
Ligand assisted growth of perovskite single crystals with low defect density, Ye Liu, Xiaopeng Zheng, Yanjun Fang, Ying Zhou, Zhenyi Ni, Xun Xiao, Shangshang Chen, and Jinsong Huang
Improving Accuracy of Unmanned Aerial System Thermal Infrared Remote Sensing for Use in Energy Balance Models in Agriculture Applications, Mitchell S. Maguire, C.M.U. Neale, and Wayne E. Woldt
Electrostatic flocking of salt-treated microfibers and nanofiber yarns for regenerative engineering, Alec McCarthy, Kossi Loic M. Avegnon, Phil A. Holubeck, Demi Brown, Anik Karan, Navatha Shree Sharma, Johnson V. John, Shelbie Weihs, Jazmin Ley, and Jingwei Xie
Large-scale synthesis of compressible and re-expandable three-dimensional nanofiber matrices, Alec McCarthy, Lorenzo Saldana, Daniel McGoldrick, Johnson V. John, Mitchell Kuss, Shixuan Chen, Bin Duan, Mark A. Carlson, and Jingwei Xie
Quantification of Nitric Oxide Concentration Using Single-Walled Carbon Nanotube Sensors, Jakob Meier, Joseph Stapleton, Eric M. Hofferber, Abigail Haworth, Stephen D. Kachman, and Nicole M. Iverson
Smooth muscle cells affect differential nanoparticle accumulation in disturbed blood flow-induced murine atherosclerosis, Hunter Miller, Morgan A. Schake, Badrul Alam Bony, Evan T. Curtis, Conner C. Gee, Ian McCue, Thomas J. Ripperda Jr., Yiannis S. Chatzizisis, Forrest Kievit, and Ryan M. Pedrigi
Direct numerical simulation of a pulsatile flow in a stenotic channel using immersed boundary method, Siamak Mirfendereski and Jae Sung Park
Common Pool Resource Management: Assessing Water Resources Planning for Hydrologically Connected Surface and Groundwater Systems, Francisco Munoz-Arriola, Tarik Abdel-Monem, and A. Amaranto
Social connectedness and negative affect uniquely explain individual differences in response to emotional ambiguity, Maital Neta and Rebecca L. Brock
In vivo printing of growth factor-eluting adhesive scaffolds improves wound healing, Kristo Nuutila, Mohamadmahdi Samandari, Yori Endo, Yuteng Zhang, Jacob Quint, Tannin A. Schmidt, Ali Tamayol, and Indranil Sinha
Preperitoneal insufflation pressure of the abdominal wall in a porcine model, Riley E. Reynolds, Benjamin Wankum, Sean J. Crimmins, Mark A. Carlson, and Benjamin S. Terry
The Role of Microenvironmental Cues and Mechanical Loading Milieus in Breast Cancer Cell Progression and Metastasis, Brandon D. Riehl, Eunju Kim, Tasneem Bouzid, and Jung Yul Lim
The Role of Microenvironmental Cues and Mechanical Loading Milieus in Breast Cancer Cell Progression and Metastasis, Brandon D. Riehl, Eunju Kim, Tasneem Bouzid, and Jung Yul Lim
Reducing Corrosion of Additive Manufactured Magnesium Alloys by Interlayer Ultrasonic Peening, M. P. Sealy, R. Karunakaran, S. Ortgies, G. Madireddy, A. P. Malshe, and K. P. Rajurkar
Ultra-fast charging in aluminum-ion batteries: electric double layers on active anode, Xuejing Shen, Tao Sun, Lei Yang, Alexey Krasnoslobodtsev, Renat F. Sabirianov, Michael P. Sealy, Wai-Ning Mei, Zhanjun Wu, and Li Tan
Process-structure relationship in the directed energy deposition of cobalt-chromium alloy (Stellite 21) coatings, Ziyad M. Smoqi, Joshua Toddy, Harold (Scott) Halliday, Jeffrey E. Shield, and Prahalada K. Rao
Ultrasonic Mapping of Hybrid Additively Manufactured 420 Stainless Steel, Luz D. Sotelo, Haitham Hadidi, Cody S. Pratt, Michael P. Sealy, and Joseph A. Turner
Three-dimensional shape analysis of peripapillary retinal pigment epithelium-basement membrane layer based on OCT radial images, Junfei Tong, Pengfei Dong, Sachin Kedar, Deepta Ghate, and Linxia Gu
Surface strengthening of single-crystal alumina by high-temperature laser shock peening, Fei Wang, X. L. Yan, Lei Liu, Michael Nastasi, Yongfeng Lu, and Bai Cui
Electron microscopy observation of electric field-assisted sintering of stainless steel nanoparticles, Fei Wang, Qin Zhou, Xing-Zhong Li, Yongchul Yoo, Michael Nastasi, and Bai Cui
In situ characterization of tensile behavior of laser rapid solidified Al–Si heterogeneous microstructures, Bingqiang Wei, Wenqian Wu, Dongyue Xie, Huai-Hsun Lien, Metin Kayitmazbatir, Amit Misra, and Jian Wang
Special Issue “CFD Modeling of Complex Chemical Processes: Multiscale and Multiphysics Challenges”, Li Xi, De-Wei Yin, and Jae Sung Park
Anisotropic scaffolds for peripheral nerve and spinal cord regeneration, Wen Xue, Wen Shi, Yunfan Kong, Mitchell Kuss, and Bin Duan
Six-Sigma Quality Management of Additive Manufacturing, Hui Yang, Prahalad Rao, Timothy Simpson, Yan Lu, Paul Witherell, Abdalla R. Nassar, Edward Reutzel, and Soundar Kumara
Part-scale thermal simulation of laser powder bed fusion using graph theory: Effect of thermal history on porosity, microstructure evolution, and recoater crash, Reza Yavari, Ziyad Smoqi, Alex Riensche, Ben Bevans, Humaun Kobir, Heimdall Mendoza, Hyeyun Song, Kevin Cole, and Prahalada Rao
Digitally twinned additive manufacturing: Detecting flaws in laser powder bed fusion by combining thermal simulations with in-situmeltpool sensor data, R Yavari, A Riensche, E Tekerek, L Jacquemetton, H Halliday, M Vandever, A Tenequer, V Perumal, A Kontsos, Z Smoqi, K Cole, and P Rao
Contact angle measurement using a Hele-Shaw cell: A proof-of-concept study, Haipeng Zhang, Jacob Gottberg, and Sangjin Ryu
Contact angle measurement using a Hele-Shaw cell: A proof-of-concept study, Haipeng Zhang, Jacob Gottberg, and Sangjin Ryu
Unveiling precipitation behavior in Mg-Y based alloys, Qingchun Zhu, Yangxin Li, Zhigang Ding, Jian Wang, Yuxuan Liu, Huan Zhang, Tian Xie, Mingxu Wang, Hong Zhu, Tao Ying, Wei Liu, and Xiaoquin Zeng
2020
Sustainable drug release from polycaprolactone coated chitin‑lignin gel fibrous scaffolds, Turdimuhammad Abdullah, Kalamegam Gauthaman, Azadeh Mostafavi, Ahmed Alshahrie, Numan Salah, Pierfrancesco Morganti, Angelo Chianese, Ali Tamayol, and Adnan Memic
Low- and High-Drag Intermittencies in Turbulent Channel Flows, Rishav Agrawal, Henry C.-H. Ng, Ethan A. Davis, Jae Sung Park, Michael D. Graham, David J.C. Dennis, and Robert J. Poole
Variations in plantar pressure variables across elliptical trainers in older adults, Judith M. Burnfield, Guilherme Manna Cesar, and Thad W. Buster
Cardiorespiratory fitness, balance and walking improvements in an adolescent with cerebral palsy (GMFCS II) and autism after motor-assisted elliptical training, Guilherme Manna Cesar, Thad W. Buster, and Judith M. Burnfield
Comparison of plantar pressure profile of young adults during training on elliptical devices and overground walking: A pilot study, Guilherme Manna Cesar, Thad W. Buster, and Judith M. Burnfield
A Wirelessly Controlled Smart Bandage with 3D-Printed Miniaturized Needle Arrays, Hossein Derakhshandeh, Fariba Aghabaglou, Alec McCarthy, Azadeh Mostafavi, Chris Wiseman, Zack Bonick, Ian Ghanavati, Seth Harris, Craig Kreikemeier-Bower, Seyed Masoud Moosavi Basri, Jordan Rosenbohm, Ruiguo Yang, Pooria Mostafalu, Dennis Orgill, and Ali Tamayol
Imparities of shear avalanches dynamic evolution in a metallic glass, Yin Du, Qing Zhou, Qian Jia, Yidi Shi, Haifeng Wang, and Jian Wang
Effect of Motor-Assisted Elliptical Training Speed and Body Weight Support on Center of Pressure Movement Variability, Farahnaz Fallahtafti, Chase M. Pfeifer, Thad W. Buster, and Judith M. Burnfield
ROBOTICDEVICESWITHONBOARD CONTROL AND RELATED SYSTEMS AND DEVICES, Shane Michael Farritor, Erik Mumm, Philip Chu, Nishant Kumar, Jason Dumpert, and Yutaka Tsutano
Foundry Sand Source Reduction Options: Life Cycle Assessment Evaluation, Samuel Ghormley, Robert Williams, and Bruce Dvorak
Low Velocity Impact of Hybrid Stacked Steel Plates, H. Hadidi, R. Q. Feng, and M. P. Sealy
NanoThermoMechanical AND and OR Logic Gates, Ahmed Hamed and Sidy Ndao
Colocalized Sensing and Intelligent Computing in Micro-Sensors, mohammad H. Hasan, Ali Al-Ramini, Eihab Abdel-Rahman, Roozbeh Jafari, and Fadi Alsaleem
NARROW BAND PEROVSKITE SINGLE CRYSTAL PHOTODETECTORS WITH TUNABLE SPECTRAL RESPONSE, Jinsong Huang and Yanjun Fang
IRON PYRITE NANOCRYSTALS, Jinsong Huang, Baodong Mao, and Christopher L. Exstrom
Passivation of defects in perovskite materials for improved solar cell efficiency and stability, Jinsong Huang and Xiaopeng Zheng
Universal mechanical exfoliation of large-area 2D crystals, Yuan Huang, Yu-Hao Pan, Rong Yang, Li-Hong Bao, Lei Meng, Hai-Lan Luo, Yong-Qing Cai, Guo-Dong Liu, Wen-Juan Zhao, Zhang Zhou, Liang-Mei Wu, Zhi-Li- Zhu, Ming Huang, Li-Wei Liu, Lei Liu, Peng Cheng, Ke-Hui Wu, Shi-Bing Tian, Chang-Zhi Gu, You-Guo Shi, Yan-Feng Guo, Zhi Gang Cheng, Jiang-Ping Hu, Lin Zhao, Guan-Hua Yang, Eli Sutter, Peter Sutter, Ye-Liang Wang, Wei Ji, Xing-Jiang Zhou, and Hong-Jun Gao
Microfluidic Systems with Embedded Cell Culture Chambers for High Throughput Biological Assays, Arian Jaberi, Amir Monemian Esfahani, Fariba Aghabaglou, Jae Sung Park, Sidy Ndao, Ali Tamayol, and Ruiguo Yang
3D printing of multilayered scaffolds for rotator cuff tendon regeneration, Xiping Jiang, Shaohua Wu, Mitchell Kuss, Yunfan Kong, Wen Shi, Philipp N. Streubel, Tieshi Li, and Bin Duan
Role of active nanoliposomes in the surface and bulk mechanical properties of hybrid hydrogels, R. Kadri, J. Bacharouch, K. Elkhoury, G. Ben Messaoud, C. Kahn, S. Desobry, M. Linder, Ali Tamayol, G. Francius, J.F. Mano, L. Sanchez-Gonzalez, and E. Arab-Tehrany
Additive manufacturing of magnesium alloys, Rakeshkumar Karunakaran, Sam Ortgies, Ali Tamayol, Florin Bobaru, and Michael P. Sealy
Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics, Huai-Hsun Lien, Jyoti Mazumder, Jian Wang, and Amit Misra
LEIDENFROST DROPLET MICROFLUIDICS, Sidy Ndao, George Gogos, Dennis Alexander, Troy Anderson, and Craig Zuhlke
ASSISTIVE REHABILITATION ELLIPTICAL SYSTEM, Carl Nelson, Cale J. Stolle, Judith M. Burnfield, Thad W. Buster, and Bernadette McCrory
Optimal Control of Active Nematics, Michael M. Norton, Piyush Grover, Michael F. Hagan, and Seth Fraden
Facile Production of Large-Area Cell Arrays Using Surface-Assembled Microdroplets, Karla Perez-Toralla, Angel Olivera-Torres, Mark A. Rose, Amir Monemian Monemianesfahani, Keerthana Reddy, Ruiguo Yang, and Stephen Morin
Challenges in path planning of high energy density beams for additive manufacturing, Karunakaran K. P, Seema Negi, Arun Nambolan, Yogesh Patil, Milan Pandya, Sajan Kapil, Dmitriy Trushnikov, Michael P. Sealy, and Alain Bernard
An Overview of Additive Manufacturing Technologies—A Review to Technical Synthesis in Numerical Study of Selective Laser Melting, Abbas Razavykia, Eugenio Brusa, Cristiana Delprete, and Reza Yavari
Microstructural evolution of nanotwinned Al-Zr alloy with significant 9R phase, N.A. Richter, Y.F. Zhang, D. Y. Xie, R. Su, Q. Li, S. Xue, T. Niu, J. Wang, H. Wang, and Xinghang Zhang
Fluid Mechanics Education Using Japanese Anime: Examples from “Castle in the Sky” by Hayao Miyazaki, Sangjin Ryu, Haipeng Zhang, Markeya S. Peteranetz, and Tareq Daher
Cycle-to-cycle flow variations in a square duct with a symmetrically oscillating constriction, Erica Sherman, Lori M. Lambert, Bethany White, Michael H. Krane, and Timothy Wei
Hierarchical Mechanisms of Lateral Interactions in High- Performance Fibers, Taylor A, Stockdale; Daniel P. Cole; Jeffrey M. Staniszewski; Michael R. Roenbeck; Dimitry Papkov; Steve R. Lustig; Youris A. Dzenis; and Kenneth E. Strawhecker
HYDROGEL MICROPHONE, Li Tan, Yang Gao, Qin Zhou, and Yongmei Chen
LSTM-Based Anomaly Detection for Non-Linear Dynamical System, Yue Tan, Chungjing Hu, Kuan Zhang, Kan Zeng, Ethan A. Davis, and Jae Sung Park
Three-Dimensional Characterization of Peripapillary Retinal Pigment Epithelium-Basement Membrane Layer in Patients following Lumbar Puncture, Junfei Tong, Pengfei Dong, Sachin Kedar, Deepta Ghate, and Linxia Gu
Magnetically Induced Carrier Distribution in a Composite Rod of Piezoelectric Semiconductors and Piezomagnetics, Guolin Wang, Jinxi Liu, Wenjie Feng, and Jiashi Yang
Characteristic boundaries associated with three-dimensional twins in hexagonal metals, Shujuan Wang, Mingyu Gong, Rodney J. McCabe, Laurent Capolungo, Jian Wang, and Carlos N. Tomé
Role of interfacial transition zones in the fracture of Cu/V nanolamellar multilayers, Siyuan Wei, Shijian Zheng, Lifeng Zhang, Yue Liu, Jian Wang, Xianping Wang, and Jiangwei Wang
Electrospun Thymosin Beta-4 Loaded PLGA/PLA Nanofiber/ Microfiber Hybrid Yarns for Tendon Tissue Engineering Application, Shaohua Wu, Rong Zhou, Fang Zhou, Philipp N. Streubel, Shaojuan Chen, and Bin Duan
Benign ferroelastic twin boundaries in halide perovskites for charge carrier transport and recombination, Xun Xiao, Wenhao Li, Yanjun Fang, Ye Liu, Yuchuan Shao, Shuang Yang, Jingjing Zhao, Xuezeng Dai, Rashid Zia, and Jinsong Huang
Crystallographic Orientation Dependence dxie@huskers.unl.eduof Mechanical Responses of FeCrAl Micropillars, Dongyue Xie, Binqiang Wei, Wenqian Wu, and Jian Wang
Rotating-liquid-based hydrogel bead generator, Haipeng Zhang and Sangjin Ryu
Multi-well Plate Channel Device with Reversible Seals, Haipeng Zhang, Timothy Wei, and Sangjin Ryu
2019
Generalized ultrasonic scattering model for arbitrary transducer configurations, Andrea P. Arguelles and Joseph A. Turner
Generalized ultrasonic scattering model for arbitrary transducer configurations, Andrea P. Arguelles and Joseph A. Turner
The LINC complex, mechanotransduction, and mesenchymal stem cell function and fate, Tasneem Bouzid, Eunju Kim, Brandon D. Riehl, Amir Monemian Esfahani, Jordan Rosebohm, Ruiguo Yang, Bin Duan, and Jung Yul Lim
3D printing of hybrid MoS2-graphene aerogels as highly porous electrode materials for sodium ion battery anodes, Emery Brown, Pengli Yan, Halil Tekik, Ayyappan Elangovan, Jian Wang, Dong Lin, and Jun Li
Wearable Devices for Single Cell Sensing and Transfection, Lingqian Chang, Yu-Chieh Wang, Faheem Ershad, Ruiguo Yang, Cunjiang Yu, and Yubo Fan
Wearable Devices for Single-Cell Sensing and Transfection, Lingqian Chang, Yu-Chieh Wang, Faheem Ershad, Ruiguo Yang, Cunjiang Yu, and Yubo Fan
Higher-Order Overtone Thickness-Shear Vibrations of Multilayered Thin-Film Acoustic Wave Resonators and Angular Rate Sensing, Hui Chen, Ji Wang, Jianke Du, and Jiashi Yang
Interface Facilitated Reorientation of Mg Nanolayers in Mg-Nb Nanolaminates, Y. CHen, Mingyu Gong, N. A. Mara, and Jian Wang
On the Measurement of Energy Dissipation of Adhered Cells with the Quartz Microbalance with Dissipation Monitoring, Amir Monemian Esfahani, Weiwei Zhao, Jennifer Y. Chen, Changjin Huang, Ning Xi, Jun Xi, and Ruiguo Yang
9R phase enabled superior radiation stability of nanotwinned Cu alloys via in situ radiation at elevated temperature, Cuncai Fan, Dongyue Xie, Jin Li, Zhongxia Shang, Youxing Chen, Sichuang Xue, Jian Wang, Meimei Li, Anter El-Azab, Haiyan Wang, and Xinghang Zhang
ROBOTIC DEVICEWITH COMPACT JOINT DESIGN AND RELATED SYSTEMS AND METHODS, Tom Frederick, Eric Markvicka, Shane Michael Farritor, and Dmitry Oleynikov
Deep learning segmentation of coronary calcified plaque from intravascular optical coherence tomography (IVOCT) images with application to finite element modeling of stent deployment, Yazan Gharaibeh, Pengfei Dong, David Prabhu, Chaitanya Kolluru, Juhwan Lee, Vlad Zimin, Hozhabr Mozafari, Hiram Bizzera, Linxia Gu, and David Wilson
Beyond the Toolpath: Site-Specific Melt Pool Size Control Enables Printing of Extra-Toolpath Geometry in Laser Wire-Based Directed Energy Deposition, Brian T. Gibson, Bradley S. Richardson, Tayler W. Undermann, and Lonnie J. Love
Beyond the Toolpath: Site-Specific Melt Pool Size Control Enables Printing of Extra-Toolpath Geometry in LaserWire-Based Directed Energy Deposition, Brian T. Gibson, Bradley S. Richardson, Tayler W. Undermann, and Lonnie J. Love
MULTI-AGENT CONTROL SYSTEM AND METHOD, Piyush Grover and Karthik Elamvazhuthi
Self-powered GHZ solution-processed hybrid perovskite photodetectors, Jinsong Huang
INSULATING TUNNELING CONTACT FOR EFFICIENT AND STABLE PEROVSKITE SOLAR CELLS, Jinsong Huang, Xiaopeng Zheng, Qi Wang, Yang Bai, and Qingfeng Dong
Effects of Compositional Tailoring on Drug Delivery Behaviours of Silica Xerogel/Polymer Core-shell Composite Nanoparticles, Wenfei Huang, Chi Pong Tsui, Chak Yin Tang, and Linxia Gu
MECHANICAL STRESSES ASSOCIATED WITH FLATTENING OF HUMAN FEMOROPOPLITEAL ARTERY SPECIMENS DURING PLANAR BIAXIAL TESTING AND THEIR EFFECTS ON THE CALCULATED PHYSIOLOGIC STRESS-STRETCH STATE, Majid Jadidi, Anastasia Desyatova, Jason N. MacTaggart, and Alexey Kamenskiy