Mechanical & Materials Engineering, Department of
Department of Mechanical and Materials Engineering: Faculty Publications
2019
Predictive Peridynamic 3D Models of Pitting Corrosion in Stainless Steel with Formation of Lacy Covers, Siavash Jafarzadeh, Florin Bobaru, and Ziguang Chen
Predictive Peridynamic 3D Models of Pitting Corrosion in Stainless Steel with Formation of Lacy Covers, Siavash Jafarzadeh, Florin Bobaru, and Ziguang Chen
Hemodynamics and Wall Mechanics after Surgical Repair of Aortic Arch: Implication for Better Clinical Decisions, Siyeong Ju, Ibrahim Abdullah, Shengmao Lin, and Linxia Gu
Hemodynamic Interference of Serial Stenoses and Its Impact on FFR and iFR Measurements, Siyeong Ju and Linxia Gu
Interactions between dislocations and three-dimensional annealing twins in face centered cubic metals, Yanxiang Liang, Xiaofang Yang, Mingyu Gong, Guisen Liu, Qing Liu, and Jian Wang
Unveiling the operation mechanism of layered perovskite solar cells, Yun Lin, Yanjun Fang, Jingjing Zhao, Yuchuan Shao, Samuel J. Stuard, Masrur Morshed Nahid, Harald Ade, Qi Wang, Jeffrey E. Shield, Ninghao Zhou, Andrew M. Moran, and Jinsong Huang
Fast Growth of Thin MAPbI3 Crystal Wafers on Aqueous Solution Surface for Efficient Lateral-Structure Perovskite Solar Cells, Ye Liu, Qingfeng Dong, Yanjun Fang, Yuze Lin, Yehao Deng, and Jinsong Huang
Three-dimensional character of the deformation twin in magnesium, Y. Liu, P.Z. Tang, M.Y. Gong, R.J. McCabe, J. Wang, and C.N. Tome
Modeling thermal and mechanical cancellation of residual stress from hybrid additive manufacturing by laser peening, Guru Madireddy, Chao Li, Jingfu Liu, and Michael P. Sealy
SOFT , MULTILAYERED ELECTRONICS FOR WEARABLE DEVICES AND METHODS TO PRODUCE THE SAME, Carmel Majidi, Michael D. Bartlett, and Eric J. Markvicka
METHOD FOR FABRICATION OF A SOFT-MATTER PRINTED CIRCUIT BOARD, Carmel Majidi, Tong Lu, and Eric J. Markvicka
LOCAL CONTROL ROBOTIC SURGICAL DEVICES AND RELATED METHODS, Eric Markvicka, Tom Frederick, Jack Mondry, Joe Bartels, and Shane Michael Farritor
Segregation of Mo atoms into stacking faults in CrFeCoNiMo alloy, Kaisheng Ming, Xiaofang Bi, and Jian Wang
Strength and plasticity of amorphous silicon oxycarbide, Kaisheng Ming, Chao Gu, Qing Su, Yongqiang Wang, Arezoo Zare, Don A. Lucca, Michael Nastasi, and Jian Wang
Influence of Metal Additives on Microstructure and Properties of Amorphous Metal–SiOC Composites, Kaisheng Ming, Qing Su, Chao Gu, Dongyue Xie, Yongqiang Wang, Michael Nastasi, and Jian Wang
Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites, Hozhabr Mozafari, Pengfei Dong, Haitham Hadidi, Michael P. Sealy, and Linxia Gu
Multi-scale modeling of the lamellar unit of arterial media, Hozhabr Mozafari, Lulu Wang, Yuguo Lei, and Linxia Gu
SYSTEM AND METHOD FOR SENSING WIND FLOW PASSING OVER COMPLEX TERRAIN, Saleh Nabi, Piyush Grover, and Mithu Debnath
Monolithic Heat-Transfer Device, Sidy Ndao, George Gogos, Dennis Alexander, Troy Anderson, and Craig Zuhlke
COMPLIANT SURGICAL GRASPERS AND METHODS OF MAKING AND USING, Carl Nelson and Alan Goyzueta
Biomechanical Foot Guidance Linkage, Carl Nelson, Cale J. Stolle, and Judith M. Burnfield
DISPOSABLE FLUIDIC SELF-PROPELLING ROBOT FOR TRAVERSING A TUBULAR PASSAGE, Carl Nelson, Benjamin Terry, Abolfazl Pourghodrat, Hossein Dehghani, Dmitry Oleynikov, and Prithviraj Dasgupta
Correlation Microanalysis of Localized Molecular Structure and Nano-mechanical Property of PVDF Based Copolymer, Wen Qian, Shuo Sun, Charles Nguyen, Stephen Ducharme, and Joesph A. Turner
MEDICAL INFLATION, ATTACHMENT AND DELIVERY DEVICES AND RELATED METHODS, Mark Rentschler and Shane Michael Farritor
The role of low-level image features in the affective categorization of rapidly presented scenes, L. Jack Rhodes, Matthew Rios, Jacob M. Williams, Gonzalo Quinones, Prahalada K. Rao, and Vladimir Miskovic
Glocal integrity in 420 stainless steel by asynchronous laser processing, Michael P. Sealy, Haitham Hadidi, Cody Kanger, X. L. Yan, Bai Cui, and J. A. McGeough
Observations of Shear Stress Effects on Staphylococcus aureus Biofilm Formation, Erica Sherman, Kenneth W. Bayles, Derek Moormeir, Jennifer Endres, and Timothy Wei
Spatiotemporal Characterizations of Spontaneously Beating Cardiomyocytes with Adaptive Reference Digital Image Correlation, Akankshya Shradhanjali, Brandon D. Riehl, Bin Duan, Ruiguo Yang, and Jung Yul Lim
Flaw detection with ultrasonic backscatter signal envelopes, Yongfeng Song, Christopher M. Kube, Zuoxiang Peng, Joseph A. Turner, and Xiongbing Li
Resistance to Helium Bubble Formation in Amorphous SiOC/Crystalline Fe Nanocomposite, Qing Su, Tianyao Wang, Jonathan Gigax, Lin Shao, and Michael Nastasi
GASTROINTESTINAL SENSOR IMPLANTATION SYSTEM, Benjamin Terry, Weston Lewis, Wanchuan Xie, Pengbo Li, and Alfred Tsubaki
Relative Contributions of Intracranial Pressure and Intraocular Pressure on Lamina Cribrosa Behavior, Junfei Tong, Deepta Ghate, Sachin Kedar, and Linxia Gu
Experimental evaluation of self-expandable metallic tracheobronchial stents, Yanli Wang, Pengfei Dong, Jingyao Ke, Xiang Shen, Zongming Li, Kewei Ren, Xinwei Han, and Linxia Gu
3D printing of silk fibroin-based hybrid scaffold treated with platelet rich plasma for bone tissue engineering, Liang Wei, Shaohua Wu, Mitchell Kuss, Xiping Jiang, Runjun Sun, Reid Patrick, Xiaohong Qin, and Bin Duan
3D printing of silk fibroin-based hybrid scaffold treated with platelet rich plasma for bone tissue engineering, Liang Wei, Shaohua Wu, Mitchell Kuss, Xiping Jiang, Runjun Sun, Reid Patrick, Xiaohong Qin, and Bin Duan
High strength, deformable nanotwinned Al–Co alloys, S. Xue, Qiang Li, D. Y. Xie, Y. F. Zhang, Han Wang, Haiyan Wong, J. Wang, and Xinghang Zhang
Interface Effects on He Ion Irradiation in Nanostructured Materials, Wenfan Yang, Jingyu Pang, Shijian Zheng, Jian Wang, Xinghang Zhang, and Xiuliang Ma
Optimization of Protein-Protein Interaction Measurements for Drug Discovery Using AFM Force Spectroscopy, Yongliang Yang, Bixi Zeng, Zhiyong Sun, Amir Monemianesfahani, Jing Hou, Nian-Dong Jiao, Lianqing Liu, Liangliang Chen, Marc D. Basson, Lixin Dong, Ruiguo Yang, and Ning Xi
Design Rules for Additive Manufacturing – Understanding the Fundamental Thermal Phenomena to Reduce Scrap, M. Reza Yavari, Kevin D. Cole, and Prahalada K. Rao
A sensorless force-feedback system for robot-assisted laparoscopic surgery, Baoliang Zhao and Carl A. Nelson
Effect of Silica Fume in Concrete on Mechanical Properties and Dynamic Behaviors under Impact Loading, Shijun Zhao and Qing Zhang
2018
The Effect of Poly (Glycerol Sebacate) Incorporation within Hybrid Chitin–Lignin Sol–Gel Nanofibrous Scaffolds, Tuerdimaimaiti Abudula, Lassaad Gzara, Giovanna Simonetti, Ahmed Alshahrie, Numan Salah, Pierfrancesco Morganti, Angelo Chianese, Afsoon Fallahi, Ali Tamayol, Sidi A. Bencherif, and Adnan Memic
SYSTEM AND METHOD FOR CONTROLLING OPERATIONS OF AIR - CONDITIONING SYSTEM, Mouhacine Benosman, Petros Boufounos, Boris Kramer, and Piyush Grover
SYSTEM AND METHODS FOR VENTILATION THROUGH A BODY CAVITY, Mark A. Borden and Benjamin S. Terry
Hemodynamics and pathology of an enlarging abdominal aortic aneurysm model in rabbits, Hongmei Chen, Yonghua Bi, Siyeong Yu, Linxia Gu, Xiaoyan Zhu, and Xinwei Han
Scaffold Structural Microenvironmental Cues to Guide Tissue Regeneration in Bone Tissue Applications, Xuening Chen, Hongyuan Fan, Xiaowei Deng, Lina Wu, Tao Yi, Linxia Gu, Changchun Zhou, Yujiang Fan, and Xingdong Zhang
METHOD OF FABRICATING A CONTINUOUS NANOFIBER, Yuris Dzenis
STRONG AND TOUGH CONTINUOUS NANOFIBERS, Yuris Dzenis
METHOD FOR DATA - DRIVEN LEARNING - BASED CONTROL OF HVAC SYSTEMS USING HIGH - DIMENSIONAL SENSORY OBSERVATIONS, Amir-massoud Farahmand, Saleh Nabi, Piyush Grover, and Daniel Nikolaev Nikovski
METHODS, SYSTEMS, AND DEVICES RELATING TO FORCE CONTROL SURGICAL SYSTEMS, Shane M. Farritor, Thomas Frederick, Kearney Lackas, Joe Bartels, and Jacob Greenburg
MULTIFUNCTIONAL OPERATIONAL COMPONENT FOR ROBOTIC DEVICES, Shane M. Farritor, Amy Lehman, and Mark Rentschler
METHODS, SYSTEMS, AND DEVICES FOR SURGICAL ACCESS AND PROCEDURES, Shane M. Farritor, Mark Rentschler, Amy Lehman, Stephen R. Platt, and Jeff Hawks
Experimental Measurement of Dolphin Thrust Generated during a Tail Stand Using DPIV, Frank E. Fish, Terrie M. Williams, Erica Sherman, Yae Eun Moon, Vicki Wu, and Timothy Wei
The Positive Role of Curcumin-Loaded Salmon Nanoliposomes on the Culture of Primary Cortical Neurons, Mahmoud Hasan, Shahrzad Latifi, Cyril J.F. Kahn, Ali Tamayol, Rouhollah Habibey, Elodie Passeri, Michel Linder, and Elmira Arab-Tehrany
Neuroprotective and Anti-Inflammatory Effects of Rhus coriaria Extract in a Mouse Model of Ischemic Optic Neuropathy, Saba Khalilpour, Ghazaleh Behnammanesh, Fouad Suede, Mohammed O. Ezzat, Jayadhisan Muniandy, Yasser Tabana, Mohamed B. K. Ahamed, Ali Tamayol, Amin Malik Shah Majid, Enrico Sangiovanni, Mario Dell'Agli, and Aman Shah Majid
An Integrated Microstructural-Nanomechanical-Chemical Approach to Examine Material-Specific Characteristics of Cementitious Interphase Regions, Mahdieh Khedmati, Yong-Rak Kim, Joesph A. Turner, Hani Alanazi, and Charles Nguyen
An integrated microstructural-nanomechanical-chemical approach to examine material-specific characteristics of cementitious interphase regions, Mahdieh Khedmati, Yong-Rak Kim, Joseph A. Turner, Hani Alanazi, and Charles Nguyen
Prevascularization of 3D printed bone scaffolds by bioactive hydrogels and cell co-culture, Mitchell Kuss, Shaohua Wu, Ying Wang, Jason B. Untrauer, Wenlong Li, Jung Yul Lim, and Bin Duan
Flow patterns through vascular graft models with and without cuffs, Chia Min Leong, Gary B. Nackman, and Timothy Wei
RARE EARTH - FREE PERMANENT MAGNETIC MATERIAL, Laura H. Lewis, Jeffrey E. Shield, and Katayun Barmak Viziri
Eigenstrain as a mechanical set-point of cells, Shengmao Lin, Marsha C. Lampi, Cynthia A. Reinhart-King, Gary C.P. Tsui, Jian Wang, Carl A. Nelson, and Linxia Gu
Excess charge-carrier induced instability of hybrid perovskites, Yuze Lin, Bo Chen, Yanjun Fang, Jingjing Zhao, Chunxiong Bao, Zhenhua Yu, Yehao Deng, Peter N. Rudd, Yanfa Yan, Yongbo Yuan, and Jinsong Huang
Smart Bandage for Monitoring and Treatment of Chronic Wounds, Pooria Mostafalu, Ali Tamayol, Rahim Rahimi, Manuel Ochoa, Akbar Khalilpour, Gita Kiaee, Iman K. Yazdi, Sara Bagherifard, Mehmet R. Dokmeci, Babak Ziaie, Sameer R. Sonkusale, and Ali Khademhosseini
Migration resistance of esophageal stents: The role of stent design, Hozhabr Mozafari, Pengfei Dong, Shijia Zhao, Yonghua Bi, Xinwei Han, and Linxia Gu
Near-Field Heat Transfer Enabled Nanothermomechanical Memory and Logic Devices, Sidy Ndao and Mahmoud Elzouka
Improved a-B10C2+xHy/Si p-n heterojunction performance after neutron irradiation, George Peterson, Qing Su, Yongqiang Wang, Natale J. Ianno, Peter Dowben, and Michael Nastasi
Investigation of toppling ball flight in American football with a mechanical field-goal kicker, Chase M Pfeifer, Timothy J. Gay, Jeff A. Hawks, Shane Farritor, and Judith M. Burnfield
Plaque Burden Influences Accurate Classification of Fibrous Cap Atheroma by In-Vivo Optical Coherence Tomography in a Porcine Model of Advanced Coronary Atherosclerosis., Christian B. Poulsen, Ryan M. Pedrigi, Nilesh Pareek, Ismail D. Kilic, Niels R. Holm, Jacob F. Bentzon, Hans Erik Botker, Erling Falk, Rob Krams, and Ranil de Silva
Complementary Microscopy Techniques Applied for Characterizing the Localized Nanoscale Structure of Poly (Vinylidene Fluoride), Wen Qian, Shuo Sun, Charles Nguyen, Wenlong Li, Stephen Ducharme, and Joesph A. Turner
Frequency dependent deformation reversibility during cyclic loading, Shuai Shao, Michael M. Khonsari, Jian Wang, Nima Shamsaei, and Nan Li
Tissue Stresses in Stented Coronary Arteries with Different Geometries: Effect of the Relation Between Stent Length and Lesion Length, Xiang Shen, Song Ji, Yong-Quan Deng, Hong-Fei Zhu, Jia-Bao Jiang, and Linxia Gu
Interfacial Characterization by Pull-Out Test of Bamboo Fibers Embedded in Poly(Lactic Acid), Quentin Viel, Antonella Esposito, Jean-Marc Saiter, Carlo Santulli, and Joseph A. Turner
Ureteral tunnel length versus ureteral orifice configuration in the determination of ureterovesical junction competence: A computer simulation model, Carlos A. Villanueva, J. Tong, Carl A. Nelson, and Linxia Gu
MECHANICAL PERFORMANCE OF PLLA STENT, Longzhen Wang, Junfei Tong, Pengfei Dong, David L. Wilson, Hiram G. Bezerra, and Linxia Gu
Molecular doping enabled scalable blading of efficient hole-transport-layer-free perovskite solar cells, Wu-Qiang Wu, Qi Wang, Yanjun Fang, Yuchuan Shao, Shi Tang, Yehao Deng, Haidong Lu, Ye Liu, Tao Li, Zhibin Yang, Alexei Gruverman, and Jinsong Huang
Techniques to stimulate and interrogate cell–cell adhesion mechanics, Ruiguo Yang, Joshua A. Broussard, Kathleen J. Green, and Horacio D. Espinosa
Visible light crosslinkable human hair keratin hydrogels, Kan Yue, Yanhui Liu, Batzaya Byambaa, Vaishali Singh, Wanjun Liu, Xiuyu Li, Yunxia Sun, Yu Shrike Zhang, Ali Tamayol, Peihua Zhang, Kee Woei Ng, Nasim Annabi, and Ali Khademhosseini
Heat transfer across a nanoscale pressurized air gap and its application in magnetic recording, Jinglin Zheng, Yung-Kan Chen, and Qin Zhou
Concomitant Crystallization in Propylene/Ethylene Random Copolymer with Strong Flow at Elevated Temperatures, Lirong Zheng, Lucia Fernandez-Ballester, Gerrit W. M. Peters, and Zhe Ma
Dislocations interaction induced structural instability in intermetallic Al2Cu, Qing Zhou, Jian Wang, Amit Misra, Ping Huang, Fei Wang, and Kewei Xu
2017
Rapidly Solidified Rare-Earth Permanent Magnets: Processing, Properties, and Applications, Shampa Aich, Dillip K. Satapathy, and Jeffrey E. Shield
Clustering on Magnesium Surfaces – Formation and Diffusion Energies, Haijian Chu, Hanchen Huang, and Jian Wang
Accommodation of the human lens capsule using a finite element model based on nonlinear regionally anisotropic biomembranes, G. David, Ryan M. Pedrigi, and J. D. Humphrey
Target Lesion Calcium Arc Influence the Performance of Stenting, Pengfei Dong, Shengmao Lin, David L. Wilson, Hiram G. Bezerra, and Linxia Gu
OCT-BASED THREE DIMENSIONAL MODELING OF STENT DEPLOYMENT, Pengfei Dong, David Prabhu, David L. Wilson, Hiram G. Bezerra, and Linxia Gu
High Temperature Near-Field NanoThermoMechanical Rectification, Mahmoud Elzouka and Sidy Ndao
Experimental study of corrugated metal-composite tubes under axial loading, Arameh Eyvazian, Hozhabr Mozafari, and Abdel Magid Hamouda
Quantification of re-absorption and re-emission processes to determine photon recycling efficiency in perovskite single crystals, Yanjun Fang, Haotong Wei, Qingfeng Dong, and Jinsong Huang
SYSTEM FOR IMAGING AND MEASURING RAIL DEFLECTION, Shane M. Farritor
METHODS , SYSTEMS , AND DEVICES RELATING TO ROBOTIC SURGICAL DEVICES , END EFFECTORS , AND CONTROLLERS, Shane M. Farritor, Thomas Frederick, Joe Bartels, Eric Markvicka, and Jack Mondry
METHODS , SYSTEMS , AND DEVICES RELATING TO SURGICAL END EFFECTORS, Shane M. Farritor, Tom Fredrick, and Joe Bartels
ROBOTIC SURGICAL DEVICES, SYSTEMS, AND RELATED METHODS, Shane M. Farritor, Erik Mumm, Philip Chu, Nishant Kumar, Jason Dumpert, and Yutaka Tsutano
METHODS, SYSTEMS, AND DEVICES FOR SURGICAL VISUALIZATION AND DEVICE MANIPULATION, Shane M. Farritor, Mark Rentschler, Amy Lehman, Nathan A. Wood, Adam Bock, and Reed Prior
Photoluminescence from Radiative Surface States and Excitons in Methylammonium Lead Bromide Perovskites, Dengyang Guo, Davide Bartesaghi, Haotong Wei, Eline M. Hutter, Jinsong Huang, and Tom J. Savenije
Meniscus-assisted solution printing of largegrained perovskite films for high-efficiency solar cells, Ming He, Bo Li, Xun Cui, Beibei Jiang, Yanjie He, Yihuang Chen, Daniel O'Neil, Paul Szymanski, Mostafa A. El-Sayed, Jinsong Huang, and Zhiqun Lin
METHOD FOR SINGLE CRYSTAL GROWTH OF PHOTOVOLTAIC PEROVSKITE MATERIAL AND DEVICES, Jinsong Huang and Qingfeng Dong
NARROWBAND NANOCOMPOSITE PHOTODETECTOR, Jinsong Huang, Fawen Guo, and Liang Shen
Floating-Gate Transistor Photodetector, Jinsong Huang and Yongbo Yuan